The 660 mm x 1219 mm (26″ x 48″) Double Geared Etching Press has been designed to print Imperial image size, whilst accommodating a larger sheet size.The top roller is 165 mm (6 1/2″) in diameter. This ensures that the printing pressure is distributed evenly over as large an area as possible during printing. The high gear ratio and top roller drive helps to eliminate paper creasing, and enables the printer to obtain perfect control and maximum print quality.

The 660 mm x 1219 mm (26″ x 48″) bed is 22 mm (7/8″) thick, stress relieved, flattened and ground solid steel to provide a flat parallel surface on which to print, and is supported by a bottom roller of 216 mm (8 1/2″) diameter to give maximum support to the bed and plate during printing. All gears are fully guarded.

The side frames are manufactured from cast iron, and are designed to withstand the tremendous pressures exerted whilst printing Intaglio.

The large diameter handwheel is also made from cast iron, and whilst it incorporates certain design strengths, it acts as a flywheel, which when printing, helps to transmit the required energy, making the printing as smooth and as effortless as possible, while still retaining the sensitivity necessary to produce fine art.

Model no.Bed sizeDescriptionPrice
26 x 48660 mm x 1219 mm (26″ x 48″)Double Geared Etching Press
(Weight 559 kg)
£ 9,305.00

All weights are approximate